NSN 5310-01-491-4715

Part Details | FLAT WASHER

5310-01-491-4715 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Alternate Parts: B1822BS240R, 5310-01-491-4715, 01-491-4715, 5310014914715, 014914715

Supply Group (FSG) NSN Assigned NIIN Item Name Code (INC)
53OCT 23, 200101-491-471513393 ( WASHER, FLAT )
REFERENCE DRAWINGS & PICTURES

RECTANGULAR

ROUND

ROUND

Cross Reference | NSN 5310-01-491-4715
Part Number Cage Code Manufacturer
B1822BS240R80204AMERICAN NATIONAL STANDARDSINSTITUTE, INCORPORATED
Technical Data | NSN 5310-01-491-4715
Characteristic Specifications
HOLE DIAMETER25.6 MILLIMETERS MINIMUM AND 26.1 MILLIMETERS MAXIMUM
PERIPHERAL SHAPE STYLE ROUND
OVERALL DIAMETER49.0 MILLIMETERS MINIMUM AND 50.0 MILLIMETERS MAXIMUM
CENTER HOLE SHAPE STYLE ROUND
CROSS-SECTIONAL SHAPE STYLE RECTANGULAR
THICKNESS4.0 MILLIMETERS MINIMUM AND 5.1 MILLIMETERS MAXIMUM
END ITEM IDENTIFICATIONINTERIM ARMORED VEHICLE (IAV),CONTRACTOR LOGISTICS SUPPORT (CLS)