NSN 5310-01-497-0203

Part Details | FLAT WASHER

5310-01-497-0203 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Alternate Parts: W221NACN013NN053NNPF1, B18.242004, B18.24-2004, AEW26X13N000GF3LX1, 5310-01-497-0203, 01-497-0203, 5310014970203, 014970203

Supply Group (FSG) NSN Assigned NIIN Item Name Code (INC)
53MAY 07, 200201-497-020313393 ( WASHER, FLAT )
REFERENCE DRAWINGS & PICTURES

ROUND

ROUND

Cross Reference | NSN 5310-01-497-0203
Part Number Cage Code Manufacturer
W221NACN013NN053NNPF105047AMERICAN SOCIETY OF MECHANICALENGINEERS, THE
B18.24-200405047AMERICAN SOCIETY OF MECHANICALENGINEERS, THE
AEW26X13N000GF3LX105047AMERICAN SOCIETY OF MECHANICALENGINEERS, THE
Technical Data | NSN 5310-01-497-0203
Characteristic Specifications
HOLE DIAMETER0.141 INCHES MINIMUM AND 0.148 INCHES MAXIMUM
PERIPHERAL SHAPE STYLE ROUND
OVERALL DIAMETER0.314 INCHES NOMINAL
CENTER HOLE SHAPE STYLE ROUND
END ITEM IDENTIFICATION1025-01-026-6648