NSN 5310-01-497-3994

Part Details | FLAT WASHER

5310-01-497-3994 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Alternate Parts: NAS620C416, 5310-01-497-3994, 01-497-3994, 5310014973994, 014973994

Supply Group (FSG) NSN Assigned NIIN Item Name Code (INC)
53MAY 20, 200201-497-399413393 ( WASHER, FLAT )
REFERENCE DRAWINGS & PICTURES

RECTANGULAR

ROUND

ROUND

Cross Reference | NSN 5310-01-497-3994
Part Number Cage Code Manufacturer
NAS620C4161E0F1ROLLS ROYCE CORP
Technical Data | NSN 5310-01-497-3994
Characteristic Specifications
HOLE DIAMETER0.245 INCHES MINIMUM AND 0.255 INCHES MAXIMUM
PERIPHERAL SHAPE STYLE ROUND
OVERALL DIAMETER0.463 INCHES MINIMUM AND 0.483 INCHES MAXIMUM
CENTER HOLE SHAPE STYLE ROUND
CROSS-SECTIONAL SHAPE STYLE RECTANGULAR
THICKNESS0.063 INCHES NOMINAL
END ITEM IDENTIFICATIONKC-130J; KC-13J
PART NAME ASSIGNED BY CONTROLLING AGENCYWASHER,AIRCRAFT,MATERIAL