NSN 5310-01-501-2112

Part Details | RECESSED WASHER

5310-01-501-2112 A washer of any peripheral shape having a centrally located hole. Both bearing surfaces are parallel and flat, but one or both of the bearing surfaces must be broken by a counterbore, countersink, or similarly shaped recess. The thickness must not exceed 25 per cent of the outside diameter or the largest outside dimension. The maximum limit of the tolerance or range applied to the thickness and/or largest outside dimension must be used to determine compliance. Excludes WASHER, CONCAVE, RETAINER, PACKING, and thrust type washers. See also SPACER, SLEEVE; and SPACER, STEPPED.

Alternate Parts: MS14183PC12, MS14183P-C12, 5310-01-501-2112, 01-501-2112, 5310015012112, 015012112

Supply Group (FSG) NSN Assigned NIIN Item Name Code (INC)
53SEP 26, 200201-501-211215933 ( WASHER, RECESSED )
REFERENCE DRAWINGS & PICTURES

SPRING TENSION

Cross Reference | NSN 5310-01-501-2112
Part Number Cage Code Manufacturer
MS14183P-C1296906MILITARY STANDARDSPROMULGATED BY MILITARY DEPARTMENTS
Technical Data | NSN 5310-01-501-2112
Characteristic Specifications
STYLE DESIGNATOR5 SPRING TENSION
HOLE DIAMETER0.789 INCHES MINIMUM AND 0.793 INCHES MAXIMUM
OUTSIDE DIAMETER1.384 INCHES MINIMUM AND 1.394 INCHES MAXIMUM
RECESS DIAMETER0.981 INCHES MINIMUM AND 0.991 INCHES MAXIMUM
MATERIAL THICKNESS0.099 INCHES MINIMUM AND 0.119 INCHES MAXIMUM
RECESS ANGLE45.0 DEGREES NOMINAL
SPECIAL FEATURESTHESE WASHERS ARE PRIMARILY FOR USE WITH MS14181 BOLTS AND MS14182 NUTS. MS14183-3 HAS BEEN REPLACED BY NASM14183 DATED DECEMBER 14,1999
END ITEM IDENTIFICATIONV-22 LRIP E-NSN ISIL
PART NAME ASSIGNED BY CONTROLLING AGENCYWASHER, COUNTERSUNK AND PLAIN, FOR USE WITH BOLTS AND NUTS UP TO AND INCLUDING 220 KSI FTU