NSN 5310-01-502-4086

Part Details | FLAT WASHER

5310-01-502-4086 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Alternate Parts: 23051326, 5310-01-502-4086, 01-502-4086, 5310015024086, 015024086

Supply Group (FSG) NSN Assigned NIIN Item Name Code (INC)
53NOV 05, 200201-502-408613393 ( WASHER, FLAT )
REFERENCE DRAWINGS & PICTURES
Cross Reference | NSN 5310-01-502-4086
Part Number Cage Code Manufacturer
2305132663005ROLLS-ROYCE CORPORATION
Technical Data | NSN 5310-01-502-4086
Characteristic Specifications
HOLE DIAMETER0.145 INCHES NOMINAL
OVERALL DIAMETER0.400 INCHES NOMINAL
THICKNESS0.056 INCHES NOMINAL
END ITEM IDENTIFICATIONENGINES T406-AD-400 AND AE2100A, C AND AE2100D2, D3, J AND AE3007A, C, H AND AE1107 AND 601K, ROLLS-ROYCE CORPORATION