NSN 5310-01-502-4820
Part Details | FLAT WASHER
5310-01-502-4820 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.
Alternate Parts: 4M3987A, 4M398-7A, 4M3987A, 4M398-7A, 4M3987A, 4M398-7A, 5310-01-502-4820, 01-502-4820, 5310015024820, 015024820
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 53 | NOV 07, 2002 | 01-502-4820 | 13393 ( WASHER, FLAT ) |
REFERENCE DRAWINGS & PICTURES
RECTANGULAR
OVAL
DEE
Cross Reference | NSN 5310-01-502-4820
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 4M398-7A | 76301 | BOEING COMPANY, THEDBA BOEING |
| 4M398-7A | 06970 | CABLECRAFT MOTION CONTROLS LLC |
| 4M398-7A | 86928 | SEASTROM MANUFACTURING CO., INC.DBA SEASTROM MANUFACTURING |
Technical Data | NSN 5310-01-502-4820
| Characteristic | Specifications |
|---|---|
| HOLE DIAMETER | 1.255 INCHES NOMINAL |
| PERIPHERAL SHAPE STYLE | OVAL |
| WIDTH | 1.514 INCHES NOMINAL |
| RADIUS AT SMALL END | 1.254 INCHES NOMINAL |
| RADIUS AT LARGE END | 1.514 INCHES NOMINAL |
| LENGTH | 2.011 INCHES NOMINAL |
| CENTER HOLE SHAPE STYLE | DEE |
| CENTER HOLE WIDTH | 1.385 INCHES NOMINAL |
| CROSS-SECTIONAL SHAPE STYLE | RECTANGULAR |
| THICKNESS | 0.030 INCHES NOMINAL |
| SPECIAL FEATURES | SMALLER END OF WASHER IS TABBED BACK 40-50 DEGREES BEGINNING AT 0.880 INCHES FROM WASHER CENTER HOLE |
| CRITICALITY CODE JUSTIFICATION | AGAV |
| END ITEM IDENTIFICATION | F/A-18E AIRCRAFT |
| PART NAME ASSIGNED BY CONTROLLING AGENCY | (INAVY) WASHER, TAB--SAFETY WIRE |
