NSN 5310-01-502-4857

Part Details | FLAT WASHER

5310-01-502-4857 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Alternate Parts: 4M39811, 4M398-11, 4M39811, 4M398-11, 4M39811, 4M398-11, 5310-01-502-4857, 01-502-4857, 5310015024857, 015024857

Supply Group (FSG) NSN Assigned NIIN Item Name Code (INC)
53NOV 07, 200201-502-485713393 ( WASHER, FLAT )
REFERENCE DRAWINGS & PICTURES

RECTANGULAR

OVAL

DEE

Cross Reference | NSN 5310-01-502-4857
Part Number Cage Code Manufacturer
4M398-1176301BOEING COMPANY, THEDBA BOEING
4M398-1106970CABLECRAFT MOTION CONTROLS LLC
4M398-1186928SEASTROM MANUFACTURING CO., INC.DBA SEASTROM MANUFACTURING
Technical Data | NSN 5310-01-502-4857
Characteristic Specifications
HOLE DIAMETER1.634 INCHES NOMINAL
PERIPHERAL SHAPE STYLE OVAL
WIDTH1.889 INCHES NOMINAL
RADIUS AT SMALL END1.464 INCHES NOMINAL
RADIUS AT LARGE END0.945 INCHES NOMINAL
LENGTH2.389 INCHES NOMINAL
CENTER HOLE SHAPE STYLE DEE
CENTER HOLE WIDTH1.762 INCHES NOMINAL
CROSS-SECTIONAL SHAPE STYLE RECTANGULAR
THICKNESS0.030 INCHES NOMINAL
SPECIAL FEATURESSMALL END OF WASHER IS TABBED BACK AT 40-50 DEGREES BEGINNING 1.070 INCHES FROM CENTER OF WASHER HOLE
CRITICALITY CODE JUSTIFICATIONAGAV
END ITEM IDENTIFICATIONF/A-18E AIRCRAFT
PART NAME ASSIGNED BY CONTROLLING AGENCY(INAVY) WASHER, TAB--SAFETY WIRE