NSN 5310-01-502-7666

Part Details | FLAT WASHER

5310-01-502-7666 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Alternate Parts: 10941, 10-941, 5310-01-502-7666, 01-502-7666, 5310015027666, 015027666

Supply Group (FSG) NSN Assigned NIIN Item Name Code (INC)
53NOV 20, 200201-502-766613393 ( WASHER, FLAT )
REFERENCE DRAWINGS & PICTURES

ROUND

Cross Reference | NSN 5310-01-502-7666
Part Number Cage Code Manufacturer
10-9411PQ32KONRAD MARINE, INCDBA KONRAD
Technical Data | NSN 5310-01-502-7666
Characteristic Specifications
WIDTH1.250 INCHES NOMINAL
LENGTH2.250 INCHES NOMINAL
OVERALL DIAMETER0.500 INCHES NOMINAL
CENTER HOLE SHAPE STYLE ROUND
THICKNESS0.250 INCHES NOMINAL
SPECIAL FEATURESWASHER IS TRIANGULAR IN SHAPE
END ITEM IDENTIFICATIONSTERN DRIVE