NSN 5310-01-503-4419

Part Details | FLAT WASHER

5310-01-503-4419 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Alternate Parts: C64135001, C64135-001, A51H3051013, A51H30510-13, 5310-01-503-4419, 01-503-4419, 5310015034419, 015034419

Supply Group (FSG) NSN Assigned NIIN Item Name Code (INC)
53DEC 18, 200201-503-441913393 ( WASHER, FLAT )
REFERENCE DRAWINGS & PICTURES

RECTANGULAR

ROUND

ROUND

Cross Reference | NSN 5310-01-503-4419
Part Number Cage Code Manufacturer
C64135-0010ZWK8MOOG INC.DBA MOOG AIRCRAFT GROUP TORRANCE
A51H30510-1326512NORTHROP GRUMMAN SYSTEMS CORPORATIONDIV MISSION SYSTEMS
Technical Data | NSN 5310-01-503-4419
Characteristic Specifications
HARDNESS RATING42.0 ROCKWELL H MINIMUM AND 59.0 ROCKWELL H MAXIMUM
HOLE DIAMETER0.332 INCHES MINIMUM AND 0.342 INCHES MAXIMUM
PERIPHERAL SHAPE STYLE ROUND
OVERALL DIAMETER0.428 INCHES MINIMUM AND 0.438 INCHES MAXIMUM
CENTER HOLE SHAPE STYLE ROUND
CROSS-SECTIONAL SHAPE STYLE RECTANGULAR
THICKNESS0.078 INCHES NOMINAL
INSIDE LEFT CORNER CHAMFER ANGLE30.0 DEGREES NOMINAL
SPECIAL FEATURESWASHER/RETAINER, COUNTERSUNK - SPECIAL; TOP OF WASHER IS .251 MIN DIA AND .255 MAX DIA (INCHES); COUNTERSUNK IS .042 INCHES DEEP
HEAT TREATMENT ANNEALED