NSN 5310-01-505-3022

Part Details | RECESSED WASHER

5310-01-505-3022 A washer of any peripheral shape having a centrally located hole. Both bearing surfaces are parallel and flat, but one or both of the bearing surfaces must be broken by a counterbore, countersink, or similarly shaped recess. The thickness must not exceed 25 per cent of the outside diameter or the largest outside dimension. The maximum limit of the tolerance or range applied to the thickness and/or largest outside dimension must be used to determine compliance. Excludes WASHER, CONCAVE, RETAINER, PACKING, and thrust type washers. See also SPACER, SLEEVE; and SPACER, STEPPED.

Alternate Parts: MS21299C9, NASM21299C9, NASM21299-C9, MS21299C9, 5310-01-505-3022, 01-505-3022, 5310015053022, 015053022

Supply Group (FSG) NSN Assigned NIIN Item Name Code (INC)
53MAR 03, 200301-505-302215933 ( WASHER, RECESSED )
REFERENCE DRAWINGS & PICTURES

SPRING TENSION

Cross Reference | NSN 5310-01-505-3022
Part Number Cage Code Manufacturer
MS21299C996906MILITARY STANDARDSPROMULGATED BY MILITARY DEPARTMENTS
NASM21299-C980205NATIONAL AEROSPACE STANDARDSCOMMITTEE AEROSPACE INDUSTRIES
MS21299C980205NATIONAL AEROSPACE STANDARDSCOMMITTEE AEROSPACE INDUSTRIES
Technical Data | NSN 5310-01-505-3022
Characteristic Specifications
HARDNESS RATING39.0 ROCKWELL C MINIMUM AND 45.0 ROCKWELL C MAXIMUM
STYLE DESIGNATOR5 SPRING TENSION
HOLE DIAMETER0.564 INCHES MINIMUM AND 0.568 INCHES MAXIMUM
OUTSIDE DIAMETER1.059 INCHES MINIMUM AND 1.069 INCHES MAXIMUM
RECESS DIAMETER0.684 INCHES MINIMUM AND 0.694 INCHES MAXIMUM
MATERIAL THICKNESS0.071 INCHES MINIMUM AND 0.085 INCHES MAXIMUM
RECESS ANGLE90.0 DEGREES NOMINAL
SPECIAL FEATURESSPEC CALLS THIS: WASHER, COUNTERSUNK, FOR USE WITH BOLTS AND NUTS UP TO AND INCLUDING 260 KSI FLU