NSN 5310-01-506-7700

Part Details | FLAT WASHER

5310-01-506-7700 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Alternate Parts: 7.1082.0000, 7.1-082.0000, 7.1082, 7.1-082, 5310-01-506-7700, 01-506-7700, 5310015067700, 015067700

Supply Group (FSG) NSN Assigned NIIN Item Name Code (INC)
53APR 09, 200301-506-770013393 ( WASHER, FLAT )
REFERENCE DRAWINGS & PICTURES
Cross Reference | NSN 5310-01-506-7700
Part Number Cage Code Manufacturer
7.1-082.000070433APPLETON MARINE, INC.
7.1-08270433APPLETON MARINE, INC.
Technical Data | NSN 5310-01-506-7700
Characteristic Specifications
SPECIAL FEATURESHARDENED 1-1/2 INCH ID FLAT WASHER
END ITEM IDENTIFICATIONCRANE ASSEMBLY, PART NUMBER SB230-42 USED ABOARD 175 FT WLM COAST GUARD VESSELS