NSN 5310-01-507-7950

Part Details | FLAT WASHER

5310-01-507-7950 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Alternate Parts: 90508ZW1B00, 90508-ZW1-B00, 90508ZW1B00, 90508-ZW1-B00, 5310-01-507-7950, 01-507-7950, 5310015077950, 015077950

Supply Group (FSG) NSN Assigned NIIN Item Name Code (INC)
53MAY 06, 200301-507-795013393 ( WASHER, FLAT )
REFERENCE DRAWINGS & PICTURES

ROUND

Cross Reference | NSN 5310-01-507-7950
Part Number Cage Code Manufacturer
90508-ZW1-B003GLS3AMERICAN HONDA MOTOR CO., INC.DIV HONDA MARINE
90508-ZW1-B0008YS9SLIDELL MARINE INC
Technical Data | NSN 5310-01-507-7950
Characteristic Specifications
PERIPHERAL SHAPE STYLE ROUND
OVERALL DIAMETER18.5 MILLIMETERS NOMINAL
SPECIAL FEATURESWASHER FOR ZW54-F0500A PROPELLER AND SHAFT
END ITEM IDENTIFICATION8MHS