NSN 5310-01-508-2689

Part Details | FLAT WASHER

5310-01-508-2689 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Alternate Parts: 73253561, 7325356-1, 73263561, 7326356-1, 73263561, 7326356-1, 5310-01-508-2689, 01-508-2689, 5310015082689, 015082689

Supply Group (FSG) NSN Assigned NIIN Item Name Code (INC)
53MAY 15, 200301-508-268913393 ( WASHER, FLAT )
REFERENCE DRAWINGS & PICTURES

BLANK RECTANGULAR

RECTANGULAR

RECTANGULAR

ROUND

Cross Reference | NSN 5310-01-508-2689
Part Number Cage Code Manufacturer
7325356-153711NAVAL SEA SYSTEMS COMMAND
7326356-131442NORTHROP GRUMMAN SYSTEMS CORPORATION
7326356-1D9182ZF INDUSTRIEANTRIEBE WITTEN GMBH
Technical Data | NSN 5310-01-508-2689
Characteristic Specifications
HOLE DIAMETER0.500 INCHES NOMINAL
PERIPHERAL SHAPE STYLE RECTANGULAR
LENGTH0.950 INCHES MINIMUM AND 1.050 INCHES MAXIMUM
WIDTH ACROSS FLATS0.880 INCHES NOMINAL
CENTER HOLE SHAPE STYLE ROUND
CROSS-SECTIONAL SHAPE STYLE RECTANGULAR
THICKNESS0.006 INCHES MINIMUM AND 0.250 INCHES MAXIMUM
END CUT ANGLE45.0 DEGREES NOMINAL
SPECIAL FEATURESDRAWING CALLS THIS: WASHER, ANODE MOUNTING
END ITEM IDENTIFICATIONASDS