NSN 5310-01-508-8017

Part Details | FLAT WASHER

5310-01-508-8017 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Alternate Parts: 93016J4303, 5086D16040, 5086D-16040, 93016J4303, 5310-01-508-8017, 01-508-8017, 5310015088017, 015088017

Supply Group (FSG) NSN Assigned NIIN Item Name Code (INC)
53JUN 03, 200301-508-801713393 ( WASHER, FLAT )
REFERENCE DRAWINGS & PICTURES

RECTANGULAR

ROUND

ROUND

Cross Reference | NSN 5310-01-508-8017
Part Number Cage Code Manufacturer
93016J430325567GORMAN-RUPP COMPANY, THEDBA MANSFIELD DIVISION
5086D-1604025567GORMAN-RUPP COMPANY, THEDBA MANSFIELD DIVISION
93016J430301365MARINE CORPS LOGISTICS COMMANDTECHNICAL DATA REPOSITORY
Technical Data | NSN 5310-01-508-8017
Characteristic Specifications
HARDNESS RATING28.0 ROCKWELL C MINIMUM AND 34.0 ROCKWELL C MAXIMUM
HOLE DIAMETER1.254 INCHES MINIMUM AND 1.260 INCHES MAXIMUM
PERIPHERAL SHAPE STYLE ROUND
OVERALL DIAMETER1.970 INCHES MINIMUM AND 2.030 INCHES MAXIMUM
CENTER HOLE SHAPE STYLE ROUND
CROSS-SECTIONAL SHAPE STYLE RECTANGULAR
THICKNESS0.248 INCHES MINIMUM AND 0.252 INCHES MAXIMUM
INSIDE LEFT CORNER CHAMFER ANGLE44.0 DEGREES MINIMUM AND 46.0 DEGREES MAXIMUM
SUPPLEMENTARY FEATURESMATERIAL IS SAE 4140. LEADED. H.R. ALLOY STEEL, H.T. TO 28-34 RC; ALL SURFACES MACHINED TO 125 RMS
END ITEM IDENTIFICATIONFUEL PUMP, 600 GPM (FU604G) 4930-01-392-7579