NSN 5310-01-509-3627

Part Details | FLAT WASHER

5310-01-509-3627 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Alternate Parts: 57935472, 5793547-2, 57935472, 5793547-2, 5310-01-509-3627, 01-509-3627, 5310015093627, 015093627

Supply Group (FSG) NSN Assigned NIIN Item Name Code (INC)
53JUN 19, 200301-509-362713393 ( WASHER, FLAT )
REFERENCE DRAWINGS & PICTURES

RECTANGULAR

ROUND

ROUND

Cross Reference | NSN 5310-01-509-3627
Part Number Cage Code Manufacturer
5793547-253711NAVAL SEA SYSTEMS COMMAND
5793547-231442NORTHROP GRUMMAN SYSTEMS CORPORATION
Technical Data | NSN 5310-01-509-3627
Characteristic Specifications
HOLE DIAMETER3.000 INCHES NOMINAL
PERIPHERAL SHAPE STYLE ROUND
OVERALL DIAMETER7.000 INCHES NOMINAL
CENTER HOLE SHAPE STYLE ROUND
CROSS-SECTIONAL SHAPE STYLE RECTANGULAR
THICKNESS0.188 INCHES NOMINAL
SPECIAL FEATURESHAS 6 HOLES, 0.547 IN. IN DIAM, DRILLED THRU
SUPPLEMENTARY FEATURESDRAWING CALLS THIS: WASHER,ISOLATION,TITANIUM, PROP
PART NAME ASSIGNED BY CONTROLLING AGENCYNAVY SPECIAL PROJECT