NSN 5310-01-510-5385

Part Details | FLAT WASHER

5310-01-510-5385 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Alternate Parts: DIN125A23STA2L, DIN125-A23-ST-A2L, 1064037714, 10640377-14, 10511795, ISO7089A23STA2L, ISO7089-A23-ST-A2L, 5310-01-510-5385, 01-510-5385, 5310015105385, 015105385

Supply Group (FSG) NSN Assigned NIIN Item Name Code (INC)
53JUL 22, 200301-510-538513393 ( WASHER, FLAT )
REFERENCE DRAWINGS & PICTURES

RECTANGULAR

ROUND

ROUND

Cross Reference | NSN 5310-01-510-5385
Part Number Cage Code Manufacturer
DIN125-A23-ST-A2LD8286DIN DEUTSCHES INSTITUT FUER NORMUNGE. V.
10640377-1456161GENERAL DYNAMICS LAND SYSTEMS -CANADA CORP
1051179556161GENERAL DYNAMICS LAND SYSTEMS -CANADA CORP
ISO7089-A23-ST-A2LI9008INTERNATIONAL ORGANIZATION FORSTANDARDIZATION (ISO)
Technical Data | NSN 5310-01-510-5385
Characteristic Specifications
HOLE DIAMETER23.0 MILLIMETERS NOMINAL
PERIPHERAL SHAPE STYLE ROUND
OVERALL DIAMETER39.0 MILLIMETERS NOMINAL
CENTER HOLE SHAPE STYLE ROUND
CROSS-SECTIONAL SHAPE STYLE RECTANGULAR
THICKNESS3.0 MILLIMETERS NOMINAL
SPECIAL FEATURESPLATING THICK AT .5 MM W/YELLOW-BROWNISH COLOR
END ITEM IDENTIFICATIONINTERIM ARMORED VEHICLE (IAV),CONTRACTOR LOGISTICS SUPPORT (CLS)