NSN 5310-01-511-3121

Part Details | FLAT WASHER

5310-01-511-3121 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Alternate Parts: A10774822211, A107748-222-11, A10772610111 ITEM 4, A107726-101-11 ITEM 4, A10774822211, A107748-222-11, A10772610111 ITEM 4, A107726-101-11 ITEM 4, 5310-01-511-3121, 01-511-3121, 5310015113121, 015113121

Supply Group (FSG) NSN Assigned NIIN Item Name Code (INC)
53AUG 06, 200301-511-312113393 ( WASHER, FLAT )
REFERENCE DRAWINGS & PICTURES

RECTANGULAR

ROUND

ROUND

Cross Reference | NSN 5310-01-511-3121
Part Number Cage Code Manufacturer
A107748-222-111BQ03GENERAL DYNAMICS ADV INFO SYS
A107726-101-11 ITEM 41BQ03GENERAL DYNAMICS ADV INFO SYS
A107748-222-113CX85GENERAL DYNAMICS MISSION SYSTEMS,INC
A107726-101-11 ITEM 43CX85GENERAL DYNAMICS MISSION SYSTEMS,INC
Technical Data | NSN 5310-01-511-3121
Characteristic Specifications
HOLE DIAMETER0.805 INCHES MINIMUM AND 0.842 INCHES MAXIMUM
PERIPHERAL SHAPE STYLE ROUND
OVERALL DIAMETER1.462 INCHES MINIMUM AND 1.499 INCHES MAXIMUM
CENTER HOLE SHAPE STYLE ROUND
CROSS-SECTIONAL SHAPE STYLE RECTANGULAR
THICKNESS0.108 INCHES MINIMUM AND 0.160 INCHES MAXIMUM
END ITEM IDENTIFICATIONBOOM ASSY, PI; W/S: SEAWOLF CLASS SSN