NSN 5310-01-513-8531

Part Details | FLAT WASHER

5310-01-513-8531 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Alternate Parts: 8044563117 SH2 PC31 DETAIL 14C, 804-4563117 SH2 PC31 DETAIL 14C, 8044563116 PC53, 804-4563116 PC53, 5310-01-513-8531, 01-513-8531, 5310015138531, 015138531

Supply Group (FSG) NSN Assigned NIIN Item Name Code (INC)
53OCT 08, 200301-513-853113393 ( WASHER, FLAT )
REFERENCE DRAWINGS & PICTURES

RECTANGULAR

ROUND

ROUND

Cross Reference | NSN 5310-01-513-8531
Part Number Cage Code Manufacturer
804-4563117 SH2 PC31 DETAIL 14C80064NAVAL SHIP SYSTEMS COMMAND
804-4563116 PC5380064NAVAL SHIP SYSTEMS COMMAND
Technical Data | NSN 5310-01-513-8531
Characteristic Specifications
HOLE DIAMETER0.562 INCHES NOMINAL
PERIPHERAL SHAPE STYLE ROUND
OVERALL DIAMETER0.875 INCHES NOMINAL
CENTER HOLE SHAPE STYLE ROUND
CROSS-SECTIONAL SHAPE STYLE RECTANGULAR
THICKNESS0.235 INCHES MINIMUM AND 0.245 INCHES MAXIMUM
END ITEM IDENTIFICATIONSCUTTLE