NSN 5310-01-514-8600

Part Details | FLAT WASHER

5310-01-514-8600 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Alternate Parts: 17N2J02187, 17N2J0218-7, 5310-01-514-8600, 01-514-8600, 5310015148600, 015148600

Supply Group (FSG) NSN Assigned NIIN Item Name Code (INC)
53NOV 06, 200301-514-860013393 ( WASHER, FLAT )
REFERENCE DRAWINGS & PICTURES

RECTANGULAR

ROUND

ROUND

Cross Reference | NSN 5310-01-514-8600
Part Number Cage Code Manufacturer
17N2J0218-788277BOEING COMPANY, THEDBA BOEING
Technical Data | NSN 5310-01-514-8600
Characteristic Specifications
HOLE DIAMETER1.068 INCHES MINIMUM AND 1.088 INCHES MAXIMUM
PERIPHERAL SHAPE STYLE ROUND
OVERALL DIAMETER1.807 INCHES MINIMUM AND 1.832 INCHES MAXIMUM
CENTER HOLE SHAPE STYLE ROUND
CROSS-SECTIONAL SHAPE STYLE RECTANGULAR
THICKNESS0.188 INCHES NOMINAL
SPECIAL FEATURESSPECIAL WASHER FLAT TWO ENDS MEASURES 1.400 TOP TO BOTTOM WITH 0.060 RADIUS AND THICKNESS 0.120 TO 0.130
END ITEM IDENTIFICATIONC-17A AIRCRAFT