NSN 5310-01-515-9999

Part Details | FLAT WASHER

5310-01-515-9999 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Alternate Parts: 02092987, 0209298-7, 0209298 ITEM 9, 5310-01-515-9999, 01-515-9999, 5310015159999, 015159999

Supply Group (FSG) NSN Assigned NIIN Item Name Code (INC)
53DEC 16, 200301-515-999913393 ( WASHER, FLAT )
REFERENCE DRAWINGS & PICTURES

RECTANGULAR

OVAL

ROUND

Cross Reference | NSN 5310-01-515-9999
Part Number Cage Code Manufacturer
0209298-755910NAVY, UNITED STATES DEPARTMENT OFTHE
0209298 ITEM 955910NAVY, UNITED STATES DEPARTMENT OFTHE
Technical Data | NSN 5310-01-515-9999
Characteristic Specifications
PERIPHERAL SHAPE STYLE OVAL
WIDTH0.813 INCHES NOMINAL
RADIUS AT SMALL END0.234 INCHES NOMINAL
CENTER HOLE SHAPE STYLE ROUND
CROSS-SECTIONAL SHAPE STYLE RECTANGULAR
THICKNESS0.047 INCHES NOMINAL
SPECIAL FEATURESWASHER IS BENT AT A 30 DEGREE ANGLE;THERE IS A SECOND HOLE WITH A DIAMETER OF .047 INCHES IN THE BENT END FOR ATTACHING A LANYARD
END ITEM IDENTIFICATIONRADAR AND IFF SYSTEMS