NSN 5310-01-518-4276

Part Details | FLAT WASHER

5310-01-518-4276 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Alternate Parts: DIN12617.5100HVA3L, DIN126-17.5-100HV-A3L, 10625479, ISO709117.5100HVA3L, ISO7091-17.5-100HV-A3L, 5310-01-518-4276, 01-518-4276, 5310015184276, 015184276

Supply Group (FSG) NSN Assigned NIIN Item Name Code (INC)
53MAR 11, 200401-518-427613393 ( WASHER, FLAT )
REFERENCE DRAWINGS & PICTURES

RECTANGULAR

ROUND

ROUND

Cross Reference | NSN 5310-01-518-4276
Part Number Cage Code Manufacturer
DIN126-17.5-100HV-A3LD8286DIN DEUTSCHES INSTITUT FUER NORMUNGE. V.
1062547956161GENERAL DYNAMICS LAND SYSTEMS -CANADA CORP
ISO7091-17.5-100HV-A3LI9008INTERNATIONAL ORGANIZATION FORSTANDARDIZATION (ISO)
Technical Data | NSN 5310-01-518-4276
Characteristic Specifications
HOLE DIAMETER20.000 MILLIMETERS MINIMUM AND 20.430 MILLIMETERS MAXIMUM
PERIPHERAL SHAPE STYLE ROUND
OVERALL DIAMETER32.4 MILLIMETERS MINIMUM AND 34.0 MILLIMETERS MAXIMUM
CENTER HOLE SHAPE STYLE ROUND
CROSS-SECTIONAL SHAPE STYLE RECTANGULAR
THICKNESS3.000 MILLIMETERS NOMINAL
END ITEM IDENTIFICATIONSTRYKER, FOV