NSN 5310-01-521-8287

Part Details | FLAT WASHER

5310-01-521-8287 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Alternate Parts: MS1422664YC616, MS1422664YC616, MS14226-64YC616, 5310-01-521-8287, 01-521-8287, 5310015218287, 015218287

Supply Group (FSG) NSN Assigned NIIN Item Name Code (INC)
53JUL 07, 200401-521-828713393 ( WASHER, FLAT )
REFERENCE DRAWINGS & PICTURES

RECTANGULAR

ROUND

ROUND

Cross Reference | NSN 5310-01-521-8287
Part Number Cage Code Manufacturer
MS1422664YC61698748AIR FORCE UNITED STATES DEPARTMENTOF THE
MS14226-64YC61696906MILITARY STANDARDSPROMULGATED BY MILITARY DEPARTMENTS
Technical Data | NSN 5310-01-521-8287
Characteristic Specifications
HOLE DIAMETER0.400 INCHES MINIMUM AND 0.405 INCHES MAXIMUM
PERIPHERAL SHAPE STYLE ROUND
OVERALL DIAMETER0.620 INCHES MINIMUM AND 0.645 INCHES MAXIMUM
CENTER HOLE SHAPE STYLE ROUND
CROSS-SECTIONAL SHAPE STYLE RECTANGULAR
THICKNESS0.057 INCHES MINIMUM AND 0.069 INCHES MAXIMUM
END ITEM IDENTIFICATIONC-135 AIRCRAFT