NSN 5310-01-522-5300

Part Details | FLAT WASHER

5310-01-522-5300 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Alternate Parts: 99C62106DWG07A0, 99C621-06-DWG-07-A-0, HI7216000 REV G ITEM 9, HI-721-6000 REV G ITEM 9, 5310-01-522-5300, 01-522-5300, 5310015225300, 015225300

Supply Group (FSG) NSN Assigned NIIN Item Name Code (INC)
53AUG 03, 200401-522-530013393 ( WASHER, FLAT )
REFERENCE DRAWINGS & PICTURES

RECTANGULAR

ROUND

ROUND

Cross Reference | NSN 5310-01-522-5300
Part Number Cage Code Manufacturer
99C621-06-DWG-07-A-07N931HHE SERVICES INCORPORATEDDBA HUBER
HI-721-6000 REV G ITEM 97N931HHE SERVICES INCORPORATEDDBA HUBER
Technical Data | NSN 5310-01-522-5300
Characteristic Specifications
HOLE DIAMETER4.010 INCHES NOMINAL
PERIPHERAL SHAPE STYLE ROUND
OVERALL DIAMETER7.000 INCHES NOMINAL
CENTER HOLE SHAPE STYLE ROUND
CROSS-SECTIONAL SHAPE STYLE RECTANGULAR
THICKNESS0.130 INCHES NOMINAL